DIY Jewelry Display Stand Detailed Steps

By Shenzhen Topwon Group Co.,Ltd

May 24, 2025

All things created with the heart are unique in the world. Today we share with you the process of making a DIY jewelry display stand:

cosmetic display boxes for Nail Polish
cosmetic display boxes for Nail Polish

01 Materials

☑Cloth: waste jeans,

☑Materials: discarded cardboard cones, secondary use of pvc boards

☑Tools: tailor’s shears, knife, needle and thread, cloth water elimination pen, ruler

☑Others: billfolds, tape, waste cardboard

02 Preparation

  1. first outline the basic shape of the desired display stand on cardboard, followed by calculating the size of each part, and then hit the board on the scrap cardboard. This not only allows you to put the parts together to see the general dimensions and accuracy of the work, but also eases the task of subsequent work. 2.
  2. Fix the cardboard on the pvc board with adhesive tape and cut the pvc board to the desired image with a knife or scissors. 3.
  3. cut the jeans out of the scrap and draw the outline on the fabric with a water-based pen in contrast to the shape made by the pvc in step 2, thus making full use of all the fabric as well as finding the right position when sewing.

03 Hand sewing

  1. Firstly, fix the fabric with the clip, then start from the two side panels and sew the fabric by hiding the stitches and following the markings of the Aqua pen until the fabric is completely closed. Finally, do the same for the three parts of the stitching, which are two panels and a base.
  2. Fold the short side of the fabric used for wrapping the cardboard tube on the outside and sew the long side together with a backstitch. After the sewing is completed, put the front side back over and put it on the exterior of the cardboard tube, sewing both sides of the rounded bottom. This method needs to be repeated to make three identical ones.
  3. Piece together the three divisions in step 1 above, secure with a needle and thread, and then thread the bracelet through the wrapped cardboard tube into the base assembly completed in step 2. This is complete!

Is not different from other people’s jewelry display rack? Of course, in addition to their own DIY, you can also buy corrugated cardboard jewelry display rack, especially stores, supermarkets and other commercial environments, suitable for use.

Share:

Trusted by These Featured Clients